A.Zero
B.One
C.Two
D.Three
E.Four
Related Mcqs:
- The number of nodes in shaft carrying only tow rotor at the ends will be
- Two shafts of the same material are subjected to the same torque. If the first shaft is of solid circular section and the second shaft is of hollow section whose internal diameter is 2/3 of the outside diameter, the ratio of weights of hollow shaft to solid shaft would be
- A shaft having one end fixed has a disc oscillating freely at the other end. If the shaft stiffness, increases the natural frequency of vibrations will
- A solid steel shaft of 100 mm diameter transmits 100 HP at (450/?) r.p.m. The torque in kg-m on the shaft would be
- A steel shaft 6 mm in diameter turns at 10,000 r.p.m. the safe working stress in shear is 350 kg/cm2. The maximum power that such a shaft may develop is approximately
- A shaft running at 300 rpm is required to transmit 300 horse power. The working stress in shear is 420 kg/cm2. The diameter of the shaft whould be in the range
- A solid shaft of 100 mm diameter transmits 100 HP at (450/?) r.p.m. The torque in kg-m on the shaft would be
- Which of the following gears are not used to transmit motion from one shaft to another shaft at an angle to the first?
- A twisting couple in a shaft induces in the shaft
- If this shaft is to be replaced by a hollow shaft of texternal diameter 22 mm for the same maximum shear stress and same torque, the internal diameter will be
