A.25%
B.33%
C.47.50%
D.50%
E.60%
Related Mcqs:
- The maximum efficiency of a scres jack provided with square threads and angle of friction 30? will be
- The maximum efficiency of a scres jack having square threads and friction angle of 30 degree will be
- Efficiency of a screw jack in maximum when its 31 helix angle, ? is
- While designing for screw threads care should be taken to provide adequate length of engagement for the screw and nut threads so as to prevent failure of threads in
- A screw jack spindle is provided with
- A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg (
- A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co–efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be
- If screw threads are to be used in a situation involving high stresses in one direction only, the types of threads suitable for this would be
- A jack having 2 cm as the diameter of the screw at the root of the thread, may be expected to safely lift a load of about
- The included angle in Acme threads is
