A.20 kg/cm2
B.40 kg/cm2
C.80 kg/cm2
D.430 kg/cm2
E.860 kg/cm2
Related Mcqs:
- When a beam having square cross-section is loaded longitudinally, the shear stress develops
- A tower subjected to load W has self-weight 2W. It is to be designed for constant compressive stress at all sections. The cross-section of the tower should have
- With a punch for which the maximum crushing stress is 4 times the maximum shearing stress of the plate, the biggest hole that can be punched in the plate would be of diameter equal to
- A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is
- A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is
- Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then
- The area around the centre of gravity of a cross-section within which any load applied will produce stress of only one sign throughout the entire cross-section, is known as
- The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
- The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
- The ratio of average shear stress to maximum shear stress for a circular section is
