A vessel is said to be thin walled, when

Strength Of Materials Mcqs
BILAL KHATTAK0

A.The vessel is made of thin sheets
B.The vessel wall thickness is less than 1 mm
C.The vessel wall thickness is equal to or less than 1/20 of the internal diameter of the vessel
D.The vessel wall thickness is equal to or less than 1/10 of the internal diameter of the above
E.None of the above

Related Mcqs:

  1. A pressure vessel is said to be thin walled when the ratio of internal diameter of the vessel and wall thickness is
  2. Blood vessel leaving glomerulus in a mammalian nephron is called:
  3. Which conduit entrance is expected to have highest loss coefficient?
  4. A spherical pressure vessel is made of thin magnesium plate 0.25 cm thick. The main diameter of the sphere is 600 cm and allowable stress in tension is 900 kg/cm2. The safe internal gas pressure for the vessel would be
  5. In case of thin cylindrical shell with hemispherical ends
  6. A wall 50 mm thick (thermal conductivity k = 40 W/m?C) has temperature difference on two surfaces of 100?C. What could probably change if the temperature difference of this wall drops to 100?C
  7. For which of the following diameters a seam-less pipe of 3 mm wall thickness will be considered as a thin walled cylinder?
  8. Rivets are generally specified by
  9. Washer are generally specified by
  10. The rivet diameter should be

Leave a Reply

Your email address will not be published. Required fields are marked *