A.500 kg/cm2
B.667 kg/cm2
C.1000 kg/cm2
D.1333 kg/cm2
E.1500 kg/cm2
Related Mcqs:
- A unknown weight falls through 1 cm on a collar rigidly attached to the lower end of a vartical bar 3 cm long and 6 cm2 in section. If the maximum instantaneous extension is 2 mm the value of stress would be
- The ratio of average shear stress to maximum shear stress for a circular section is
- The maximum temperature in an I.C. engine is of the order of
- A rectangular beam 200 mm deep by 100 mm wide-subjected to maximum bending moment of 500 kNm. The maximum stress in the beam will be
- The slenderness ratio of vertical comumn of square cross-section of 2.5 cm sides and 600 cm length is
- The ratio of maximum shear stress to average shear stress for a circular section is
- A tower subjected to load W has self-weight 2W. It is to be designed for constant compressive stress at all sections. The cross-section of the tower should have
- A 3.2 m diameter balloon is filled with Helium. The total weight of balloon, gas and pay load is 10 kg kg. In an isothermal atmosphere having conditions identical to N.T.P. the balloon will rise to a height of about
- The maximum temperature in a gas turbine is of the order of
- In case of thin walled cylinders the ratio of hoop stress to maximum shear stress stress is
