A.1
B.2
C.6
D.3
E.4
Related Mcqs:
- If a solid cube is subjected to equal tensile stresses on all its faces the volumetric strain is n times the linear strain, where
- Two steel shaft each of length L and outside diameter D are subjected to uniform torsion. The first shaft is solid while the second one is hollow with inside diameter D/2. The ratio of the strain energies that these two shafts can absorb without exceeding a maximum allowable shear stress, would be
- Two bars of sifferent materials are of the same size and are subjected to same tensile forces. If the bars have unit elongation in the ratio of 7 : 3, then the ratio of modulii of elasticity of the two materials is
- The coefficient of linear expansion of a solid is L. The volume V of a cube of this solid on being heated by 1?C will change by
- Two shafts of the same material are subjected to the same torque. If the first shaft is of solid circular section and the second shaft is of hollow section whose internal diameter is 2/3 of the outside diameter, the ratio of weights of hollow shaft to solid shaft would be
- A solid circular shaft and a thin walled circular tube made of the same material and having the same weight are stressed in torsion to the same maximum shear stress. The ratio of the amounts of strain energy stored in the two shafts would be
- A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be
- A dimensionless number representing the ratio of inertia forces to viscous forces is known as
- A cube of wood supporting 200 gm mass just floats in water. When the mass is removed, the cube rises by 2 cm the side of the cube will be
- Two beams of equal cross-sectional area are subjected to equal bending moment. If one beam has square cross-section and the other has circular section, then
