A.100 kg
B.148.84 kg
C.500 kg
D.648.84 kg
E.1000 kg
Related Mcqs:
- A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is
- A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is
- A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly
- The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as
- The horizontal component of force on a curved surface is equal to the
- Find the value of opening stock from the following data. Purchases 1,50,000, Closing stock 30,000 Sales 2,20,000, Gross profit 40,000.?
- A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is
- In above problem, what will be the horse power required to drive the pump?
- Three pieces of wood having 3.75 cm x 3.75 cm square cross-sections are glued together and to the foundation. If the horizontal force P = 600 kg is applie3d to the central piece, the average shearing stress in each of the glued joints would be
- A sheet metal 2 mm thick having a shear strength of 40 kg/cm2 is to receive a punch hole of 35 mm diameter. The force required to make the punching will be
