A.0.001 to 0.002 mm/mm
B.0.003 to 0.005 mm/mm
C.0.1 mm to 0.3 mm
D.0.3 mm to 0.5 mm
E.1 mm/mm
Related Mcqs:
- The order of dimensional accuracy in die casting is nearly
- With electronic circuits the accuracy that can be expected from scanners will lie in the range of
- Shell moulding can be used for
- The advantage of shell moulding is
- Shell moulding is a process in which
- Shell moulding is uneconomical for
- As compared to green sand in shell moulding cooling rate of cast metal is slow. Hence as compared to green sand castings, shell moulded castings will have
- A 0 – 100?C thermometer has accuracy of + 2.5%. It accuracy while reading 50 mA will be
- A cannon of barrel length 2 m fires a shell of weight 6 kg with a muzzle velocity of 50 m/sec. The force exerted by the gases on the shell would be approximately
- A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately?
