A.750 kg/sq-cm
B.500 kg/cm2
C.300 kg/cm2
D.250 kg/cm2
E.595 kg/cm2
Related Mcqs:
- In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
- The ratio of maximum shear stress to average shear stress for a circular section is
- The ratio of maximum shear stress to average shear stress in case of a circular beam transmitting power is equal to
- The ratio of maximum shear stress to the average shear stress in a rectangular beam subjected to torsion is
- The ratio of average shear stress to maximum shear stress for a circular section is
- In case of thin walled cylinders the ratio of hoop stress to maximum shear stress stress is
- Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
- In case of thin walled cylinders the ratio of hoop stress to radial stress is
- The safe value of stress under which a member subjected to reversible tensile or compressive stress will not fail is known as
- A steel shaft 6 mm in diameter turns at 10,000 r.p.m. the safe working stress in shear is 350 kg/cm2. The maximum power that such a shaft may develop is approximately
