A.10 mm
B.15 mm
C.20 mm
D.30 mm
E.40 mm
Related Mcqs:
- For butt welding of two plates each of which is 25 mm thick, the best process would be
- For butt welding of two plates, each of which is 300 cm thick, the best process would be
- Two 20 mm thick plates are to be gas welded. What size of welding rod should be selected out of the following rods available?
- Diameter of thick filament is____________??
- How many coins 0.75 cm in diameter and 1/8 cm thick must be malted down to form a rectangular solid whose edges are 5 cm. 4 cm and 3 cm?
- A strip of steel 75 mm wide 40 mm thick is bent round a circular drum of 4.96 m outside diameter. If E = 2 x 105 N/mm2, the maximum stress due to bending will be
- A sheet metal 2 mm thick having a shear strength of 40 kg/cm2 is to receive a punch hole of 35 mm diameter. The force required to make the punching will be
- For punching a hole of 25 mm diameter in a plate 20 mm thick, if the shear stress of plate material is 30 kg/mm2, the force required would be
- A spring steel ribbon 3.2 mm wide, 0.5 mm thick is wound on a 500 mm diameter cylinder. If E = 2 x 105 N/mm2, the maximum stress in the steel will be
- Two plates are joined by a parallel fillet welds. The plates are subjected to a tensile load of 35000 kg. If the allowable shear stress for the weld material be 800 kg the minimum length of 15 mm weld required to resist this load would be
