A.A to B
B.B to A
C.Cannot be ascertained from data
Related Mcqs:
- In a pumping installation the suction line is is 4 metre long and suction pipe diameter is 100 mm. Now if the suction pipe is replaced by a pipe combination consisting of 2 metres of 100 mm diameter pipe joined with 2 metres of 150 mm diameter pipe, the suction heat will become
- The total energy grade line in pipe flow is a graphical representation of Bernoullis equation and represents the sum of elevation head pressure head and velocity head measured above
- The distance from pipe boundary, at which the point velocity is equal to average velocity in case of turbulent flow (when R is the radius of the pipe), is
- The flow of water in a pipe of diameter 3000 mm can be measured by
- Flow of water in a pipe of 250 cm diameter can be measured by
- What should be the thickness of a cast iron pipe 45 cm diameter if it is required to sustain 6 kg/sq cm inside pressure ? The maximum stress in the pipe material being limited to 140 kg/cm2
- The hydraulic grade line in pipe flow indicates the variation of
- Boundary layer thickness (?) is the distance from the surface of the solid body in the direction perpendicular to flow, where the velocity of fluid is equal to
- An imaginary curve drawn through a flowing fluid in such a way that the tangent to it at any point gives the direction of the velocity of flow at that point, is known as
- Transformer oil having kinematic viscosity of 3.66 x 10-6 m2/s flows through a tube 8 mm diameter at velocity of 0.6 m/s. The value of Reynolds number of flow would be
