A.5 – 10 kg
B.10 – 15 kg
C.15 – 20 kg
D.20 – 25 kg
E.25 – 30 kg
Related Mcqs:
- A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co–efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be
- The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was
- A cannon of barrel length 2 m fires a shell of weight 6 kg with a muzzle velocity of 50 m/sec. The force exerted by the gases on the shell would be approximately
- A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is
- The value of acceleration due to gravity is 980 cm/sec2. Its value in meter per (hour)2 will be
- For punching a hole of 25 mm diameter in a plate 20 mm thick, if the shear stress of plate material is 30 kg/mm2, the force required would be
- The force which produces an acceleration of 1 m/sec2 in a mass of 1 kg is called
- A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is
- A plate 0.6 mm distant from a fixed plate moves at 0.24 m/s and requires a force per unit area of 1 N/m2 to maintain this speed. Thefluid viscosity of the substance between the plates in N.s/m2 is
- A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be
