A.50 kcal/min
B.50 kcal/sec
C.50 kcal/hr
D.200 kcal/hr
E.200 kcal/min
Related Mcqs:
- The face temperatures of a flat wall are 650?C and 450?C respectively and the thermal conductivity of wall material is 0.30 kcal/m-hr-?C. For a wall thickness of 20 cm, the rate of heat conduction per square meter of wall area will be
- The surface temperatures of a flat wall are 650?C and 450?C respectively and the thermal conductivity of the wall material is 0.30 kcal/m-hr-?C. The heat flux for a wall of 20 cm thickness will be
- The rate of heat loss through a furnace wall is 1000 kcal per hour when inside temperature is 1000?C and outside wall temperature is 500?C. What should be the wall thickness in case the thermal conductivity of wall material is 0.5 kcal/m-hr?C
- For the synthesis of 10g of glucose ______________ of energy is required??
- A sphere of radius 40 cm is lagged to a radius of 50 cm. The temperatures of outer and inner surfaces are 66?C and 235?C respectively. Thermal conductivity of logging per cm thickness is 0.7 kcal/m-hr?C. The rate of heat leakage will be
- The rate of heat flow between a solid wall and a fluid (in contact with a solid wall) is given by
- The heating value of petrol is
- The rate of radiant energy, which is emitted by a surface at any temperature and in small wavelength is found from the known rate of energy, which under the same condition would be emitted from a black surface by multiplying with the absorptivity. Above enunciation is known as
- The calorific value of diesel oil is expected to be around
- _______________ energy is the energy stored within the earth.
